$299.99
Shimano Sustain FI Spinning Reels are packed with a long list of high-end features which translates to serious performance. From bass to small billfish, Sustain is built with the power and rigidity to handle a wide variety of fishing challenges while maintaining the refinement and light rotation that Sustain is known for. By combining Shimano's water-repellent coating and the specially-designed, water channeling, labyrinth construction, X-Protect provides high-level water resistance without sacrificing light gear and rotor rotation. By utilizing the asymmetrical, super-light, perfectly balanced design of the MagnumLite Rotor, the Sustain requires very low inertia to start rotating, resulting in an immediate, light and smooth feel.
Features:
X-Ship provides improved gear durability. By supporting the pinion gear on both ends with bearings, the pinion gear maintains precise alignment with the drive gear. This allows the gears to stay in the same position under the heaviest loads. The added benefit of X-Ship technology is that friction between the spool shaft and gear are eliminated. This further benefits anglers with enhanced casting performance and casting distance of lighter lures.
The new design of the MagnumLite Rotor produces unprecedented light rotation. The rotor profile — which was previously symmetrical — is now asymmetrical, and the bail arm mechanism — previously situated on the same side as the line roller — has been moved to the opposite side. This ultimately improves the overall balance. Combined with a lightweight line roller, titanium bail and optimum arrangement of rotor thickness, the MGL rotor achieves a 14% reduction in rotational inertia to increase sensitivity to unprecedented levels. But the evolution of rotors is not limited to just reduced weight, the rotor rigidity on the line-roller side is an important performance factor as well. When compared to conventional models, the rigidity for the MGL Rotor is up to 30% higher and contributes to enhanced drag performance.
S A-RB bearings are put through the same process as Shimano’s A-RB bearings but feature shields on both sides of the bearings. These shields reduce the possibility of salt or sand inhibiting rotation of the bearing.
This two-speed oscillation system layers the line onto the spool in a precise crisscross pattern that reduces line-to-line friction for longer casts. Reels with Aero Wrap II technology utilize a patented worm gear design to move the spool upward quickly and downward slowly to wind the line in a precise pattern, reducing friction and giving anglers smoother and longer casting ability.
G-Free Body technology has been developed to shift the reel's center of gravity closer to the rod. By moving the center of gravity closer to the angler’s hand, the G-Free Body helps to reduce fatigue and enhance casting comfort.
CI4 is a Shimano original material reinforced with carbon fiber that is lighter and has a higher strength than conventional resin material. CI4+ is an advanced version of the original CI4 material and is 2.5x more rigid than its predecessor. While improving lightness and rigidity, reel bodies and rotors built with CI4+ are further reduced in size and weight.
X-Protect provides high-level water resistance without sacrificing light gear and rotor rotation. By combining Shimano’s water-repellent coating with a water-channeling labyrinth construction, X-Protect provides added durability in tough conditions.
With the use of rubber gaskets the drag is sealed against intrusion of the elements such as water and dust.
One-Piece Bail allows the line to travel unimpeded to the line roller. The seamless design reduces friction and decreases the chance of tangles or the line catching on the bail arm.
With amazing strength and durability, the HAGANE Gear is at the very heart of most Shimano reels. Shimano, through the application of state-of-the-art technologies, gives anglers the long-lasting smoothness and pleasure that is felt when anglers first use a reel, over and over again. No cutting work is applied to the teeth of the drive gear during fabrication, instead the entire surface is calculated in minute detail by special 3D-design and then formed by Shimano's cold-forging technology. The result is assured resilience. HAGANE Gear is the fruit of Shimano's inexhaustible pursuit for durability — the strength and power of forged metal continues to represent the fundamental concept of Shimano reels.
The Cross Carbon Drag material provides a wider range of drag settings compared to traditional drag materials. The Cross Carbon Drag provides the smoothest Shimano drag performance ever while providing anglers with increased durability.
By strengthening the spool support of the main shaft, the play and fluctuation of the spool during drag operation are suppressed. The Rigid Support Drag allows smooth and consistent drag delivery, even under high load.
The most obvious component of the Propulsion Line Management System is the new Propulsion Spool Lip design. Through tens of thousands of casting tests and computer simulations, Shimano’s new spool lip design provides longer casting distances than a standard spool lip design while also preventing backlashes and wind knots from forming.
SPECIFICATIONS
SPECIFICATIONS
PRODUCT CODE |
WEIGHT |
MAX DRAG |
MONO LINE CAPACITY |
BEARINGS |
GEAR RATIO |
LINE RETRIEVE PER CRANK |
POWERPRO LINE CAPACITY |
SKU |
SA2500HGFI |
8.3 |
20 |
6/200, 8/140, 10/120 |
8+1 |
6.0:1 |
35 |
10/150, 15/145, 30/100 |
SA2500HGFI |
SA4000XGFI |
10.1 |
24 |
8/240, 10/200, 12/160 |
8+1 |
6.2:1 |
39 |
15/280, 30/170, 50/150 |
SA4000XGFI |
SAC3000HGFI |
7.9 |
20 |
6/230, 8/170, 10/140 |
8+1 |
6.0:1 |
35 |
10/200, 20/140, 40/105 |
SAC3000HGFI |
SAC5000XGFI |
10.1 |
24 |
10/240, 12/195, 14/165 |
8+1 |
6.2:1 |
41 |
20/220, 30/200, 40/160 |
SAC5000XGFI |
$24.99
This Tackle Express exclusive Tuna Popper Shirt is sure to turn heads. It's been created by our good friend Tony, he is an amazing artist with a passion for swimbait fishing. ...
$24.99
*** Coming early September 2020*** This Tackle Express exclusive Jaws Shirt is sure to turn heads. It's been created by our good friend Tony, he is an amazing artist with...
$91.66 $110.00
+ Standard fit Shell Jacket + Durable abrasion resistant fabrication + 2.5 layer 10k waterproof/ 5k breathable laminated fabric + Fully taped internal seams + Wind resistant construction + Adjustable cuffs + Interior...